Things to Know About HPE ProLiant DL160 Gen10 Server

The HPE ProLiant DL160 Gen10 server is a 1U entry-level system that can sustain two Intel Xeon Scalable processors from either the Silver or Bronze, members. It sustains as much as 256GB of memory with significant storage space in advance from either LFF or SFF drives. This is a “Right-Sized” server offering simply the best balance of performance, compute, and capability is taken care of by HPE’s integrated Lighting Out, or iLO module.

HPE ProLiant DL160 Gen10, or G10 Server: System Introduction Description

With the addition of Intel Xeon Scalable CPUs, the HPE ProLiant DL160 Gen10 Web server delivers a 71% rise in efficiency plus a 27% boost in core count contrasted to the previous generation Intel Xeon E5-2600 v4 processors. Scalable CPUs also sustain two more memory networks at 6 per CPU, contrasted to simply 4 on the previous generation, boosting memory data transfer, as well as the application efficiency. The HPE DL160 Gen10 can be used to sustain small to tool-sized companies with mid-level virtualization.

Efficiency

With the HPE ProLiant DL160 Gen10 web server’s just-right dimension this system supports a maximum of 256GB of memory utilizing either 2 Silver 4110 CPUs or 2 Bronze 3106 processors. Power is offered by either a cabled PSU or dual hot-swap power supplies.

Memory

Each CPU sustains approximately 8 memory components in six memory networks. Four of those channels support a solitary memory component and the continuing to be two memory channels support 2 memory components each in a 2 + 1 + 1 configuration. Only Registered RDIMM memory modules are sustained as well as operate at speeds of approximately 2400MHz.

Storage space

Supported drive arrangements on the HPE DL160 Gen10 server include 4 x 3.5-inch drives or 8 x 2.5-inch drives. A mini-SD card slot on the motherboard, in the direction of the back of the system, supplies storage for a hypervisor. SATA HDDs, as well as SSDs, are supported natively with 3 SATA ports on the system board. For SAS or NVMe HDD or SSD drive support, you will require an optional SmartArray RAID controller offering transfer rates of up to 12Gb/s.

To learn more, please visit https://www.quickserv.co.th/server/HP/Rack-1U-:-Dual-Sockets/HPE-ProLiant-DL160-Gen10.html.